Tool Page

 ROUTER BIT SHARPENER
 DOUBLE SIDED WITH HANDLE

We think this may become a classic “go to” diamond stone. The Diamond Cross Router Bit Sharpener was created directly from Proto-type tester’s feedback. The design brief created from them was to reduce the stones width and have the handle closer to the point of contact with either router bit edge or as we also discovered - TCT saw blades. A 2nd series of tests were carried out confirming that the new design all but removes the leverage feed back to the handle from the blade edge. We think you’re going to like the result.

Even more user feedback helped create DC’s NEW Diamond Stone Holder. We now know that a good number of woodworkers like to sharpen router bits on their bench and Yes we know there’s the ubiquitous non slip mat however you need a bench corner to work from to give clearance for the cutter body to pass underneath the sharpening surface. The solution- A grippy “clearance giving” Diamond Stone Holder specifically designed for the small but perfectly formed Router Bit Sharpener.

Router Bit Sharpener 300/600Grit
Price: $19.95 USD
Diamond Stone Holder (Pair)
Price: $11.50 USD
  • FREE SHIPPING - Orders over $50USD within the 48 Contiguous US States
Buy in confidence direct from the manufacturer.
Shipped from Michigan, USA.

    ROUTER CUTTER SHARPENER FEATURES
  • Handy Size The Router Bit Sharpener is the smallest Diamond stone in the new range, however it is just as important as the other stones. Keep your bits sharp or risk spending time and energy cleaning up the burn marks left on a routed edge from a blunt bit and given its size it's hardly going to cramp your shelves.
  • Double Sided 300-600 Grit We decided very early on that it made no sense to manufacture single sided diamond stones.
    The cost of the Stainless steel remains the same for a single or double sided. So we didn’t sell ourselves short – The whole Diamond Cross range is Double sided.
    Side one Coarse 50Micron 300 grit diamond grade
    Used for fast stock removal, Ideal for the preparation of the edge.
    Side two Fine 25Micron or 600 grit diamond grade
    Used for honing a primary edge
  • Solid 1/16” Thick Anti Rust Stainless Steel Core The majority of diamond stones on the market are manufactured in steel. However our desire to produce the best quality diamond stones served as the best incentive. So we use stainless steel - the superior “non rusting” option for the Diamond Cross range of stones.
  • Quality Assured The DC Router Bit Sharpener is assembled and thoroughly inspected By us in M.POWER’s factory in the UK to ensure every diamond stone is perfect prior to packaging and despatch.
  • 3 Year Guarantee We are so confident of the build quality of our new Diamond Cross range of sharpening stones. That each stone is backed by a “no fuss” 3 year extended guarantee.
  • Diamond Cross Patterned Recess The Highly distinctive DC embossed patterned recesses provides the perfect balance between the ultra hardwearing diamond coverage and anti clog properties of the pattern.
  • In Surface Grit Indicator All Diamond Cross sharpening stones are double sided, so on each side of the stone a highly visable number is embedded clearly indicating the grade of the diamond.
  • Bench Mountable - Diamond Stone Holder OK so the Router Bit Sharpener is pretty small however it hasn’t stopped us from producing a stone holder that safely holds your Router Bit Sharpener steady on a work surface. It also gives much needed elevation allowing the body of the Router Bit to comfortably clear the work surface when sharpening. The Diamond Stone Holders - DSH can also hold a range of other manufacturers’ credit cards and larger solid bench diamond stones.
    ROUTER BIT SHARPENER APPLICATION
  • Router Bits - Cutters: A sharp router cutter is one of the simplest ways to ensure that any work carried out with a router i.e a molded edge or rebate will turn out with a crisp profile with no tears or burn marks. There’s no real technique to learn sharpening bits either. From large ½” shank mutli profile bits to a tiny 2/16th flute. The Router Bit Sharpener can handle any size or type of bit easily either freehand or when its bench mounted with the Diamond Stone Holder (accessory required)
  • Saw Blades: A nice surprise was when we discovered just how good the Router Bit Sharpener stone was for sharpening TCT saw blades; It's down to the contact/sharpening point being so close to the handle. It makes it easier to maintain a constant sharpening angle on both the forward and returning sharpening stroke. Literally a couple of strokes on each tooth will make the world of difference.
    Hints and Tips:
  • Cleaning Bits And BladesBefore attempting to sharpen either a router bit or saw blade. Clean off all the pitch, resin or glue build up. Soaking in a tray of Domestic oven and grill degreasant works well. Or there are specific “specialist” cleaners available but from what I can gather from woodworkers in general. There seems little difference in performance over and above the domestic cleaners. Please read and abide by the safety instructions of any cleaning product that you decide to use.
  • Blade And Bit BalanceIt’s important for the balance of any high speed blade that when it’s being sharpened that each tooth or cutting face receives the same number of sharpening strokes.
  • Where To StartWhen sharpening a saw blade use a marker pen to mark the point at which you start that will let you know which is the last tooth you need to sharpen.
  • Bedding InAll new diamond stones feel very coarse to the touch regardless of the micron or grit size of the diamond used.
    This is a result of the plating process and is quite normal. The stone will bed after a few uses and the difference in grit will become more apparent.
  • No PressureGuilty as charged , As I’ve subsequently learnt I’ve always tended to use too much pressure when sharpening with Diamond stones.
    It is absolutely the case that an easy light pressured sharpening stroke is all that is required to gain optimal performance from any of the Diamond stones.
    To use too much pressure tears the diamond particles from its nickel bed - compromising the performance of the diamond stone and reducing its serviceable life dramatically.
  • LubricationAgain its really down to personal preference as Diamond Cross sharpening stones can be used dry. We do recommend using a lubricant. Water works well or a purpose design lapping fluid but really it’s down to personal choice.
  • Dangerous ToolsWarning by the very nature of the tools being sharpened i.e. they are ALL designed to cut something. In the wrong hands they can be very dangerous
available from
USA UK
Sharpen Knives
Sharpen Router Bits
Sharpen Cutters
Sharpen Cutters
Sharpen Drill Bits
Sharpen Small Bits
Mounted
Mounted
Recess Pattern
Recess Pattern
DC Handle
DC Handle