http://www.m-powertools.com News from M.POWER Tools en M.POWER Tools http://www.m-powertools.com/images/logo.gifhttp://www.m-powertools.com May 2012 So it's legally allowed to buy a pint in a pub, get married without it's parents consent and ride a very fast motorbike that it couldn't afford… Happy Days! http://www.m-powertools.com/ April 2012 Infinity Cutting Tools, 6089 Johns Rd, Suite #11, Tampa FL, 33634, Tel: 1-877-USA-BITS, Fax: 1-813-881-0030 http://www.infinitytools.com/MPower-Point-2-Point-Layout-Marking-Tool/productinfo/100-090/ April 2012 The new CRB7 Router Base is now available at Infinity Cutting Tools, Big Tool Store and Madisound Speaker Components http://www.m-powertools.com/products/crb7/combination-router-base.htm March 2012 "Its 7 core functions takes the average router to a different level of performance. Confirming it as the most versatile power tool money can buy..." READ THE FULL REVIEW http://www.m-powertools.com/products/crb7/combination-router-base.htm December 2011 "The maker of the Combination-3D try square claims that it can do the work of a saddle square, a marking gauge, a bevel gauge, and a combination square — with no loss of accuracy..." READ THE FULL REVIEW http://www.jlconline.com/cgi-local/viewnew.pdf/0/f8d9d6f5c95be882b93a1166c5fb50f0/www.jlconline.com/cgi-bin/jlconline.storefront/4eef2abc11c1922427170a323cb406b3 November 2011 "M.Powers Point-2-Point layout measuring tool makes easy work of setting out a row of screws or dowels. Just extend it fully and bring the mechanism down to the required size..." READ THE FULL REVIEW http://www.m-powertools.com/products/point-2-point/p2p-hardhat.htm November 2011 Stay tuned for the PSS1 Sharpening System, Combination 3D Square and Flat Lying Trammel Set to make another appearance that same weekend. http://www.m-powertools.com/ October 2011 "The Point 2 Point device has taken all the mathematics out of the equation. This clever expanding gadget..." READ THE FULL REVIEW http://www.m-powertools.com/products/point-2-point/p2p-australianwoodsmith.htm October 2011 "I am a self-confessed power tool junkie, I will happily admit... However, I can also appreciate a good, manual, non-electric hand tool when I see, or more importantly, use one..." READ THE FULL REVIEW http://www.onlinetoolreviews.com/reviews/mpower3dsquare.htm October 2011 "Most carpenters scribe with a compass or a small block of wood. That works fine but requires a practiced hand..." READ THE FULL REVIEW http://www.toolsofthetrade.net/ October 2011 DIY Networks Cool Tools are now showing episodes of the PSS1 Sharpening System, Combination 3D Try Square and the Flat Lying Trammel Set http://www.diy.ca/Schedule/ October 2011 Elite Tools, 50, rue Delisle, Levis Quebec, G6V 6K2 http://www.elitetools.ca/product/m-power-perfect-butt-profile-scriber-pb September 2011 "M.Power, the makers of the inventive and effective little scribing tool that we reviewed a bit ago, have a new trammel set that can be used for more than just marking circles and arcs..." READ THE FULL PRESS RELEASE http://www.m-powertools.com/products/tri-scribes/flts-toolsnob.htm August 2011 "First and foremost, this product from M-Power looks like a pretty serious try square..." READ THE FULL PRESS RELEASE http://www.m-powertools.com/products/c-3d/toolmonger.htm August 2011 "There are a couple of ways to scribe something. Most people seem to use dividers, but we gave those up years ago..."READ THE FULL PRESS RELEASE http://www.toolsnob.com/archives/2011/08/mpower_perfect_butt_profile_sc.php August 2011 "To have one of our tools voted for and recognized by such esteemed professionals is a real honour..."READ THE FULL PRESS RELEASE http://www.m-powertools.com/news/c3d-award.htm August 2011 "If you are like me, you have several chisels in a rack, ... except for one problem. They are as dull as a piece of spaghetti ... The thought of trying to hold them against the grinder at the right angle and then not letting them get overheated is daunting to say the least ... then the Precision Sharpening System (PSS1) ... is a gift from above ..."READ THE FULL REVIEW http://www.thisoldworkshop.com/index.php/reviews/103-review-pss July 2011 "90% of the population are right handed yet most are using left-handed tape measures when marking - why? M.POWER's R1 tape measure is the right way round..."READ THE FULL REVIEW http://americanwoodworker.com/blogs/tools/archive/2011/04/05/tool-news-m-powers-s-r1-tape-measure.aspx July 2011 "The Precision sharpening system takes the guesswork out of sharpening chisels and plane blades..."READ THE FULL REVIEW http://www.m-powertools.com/products/pss1/pss1-ebuild.htm Spring 2011 "The R1 tape measure is a simple solution that makes measuring and marking user-friendly for right-handed woodworkers..."READ THE FULL REVIEW http://www.m-powertools.com/products/r1-tape-measure/r1-scrollsaw.htm May/June 2011 Infinity Cutting Tools, 6089 Johns Rd, Suite #11, Tampa FL, 33634, Tel: 1-877-USA-BITS, Fax: 1-813-881-0030 http://www.infinitytools.com May 2011 Elite Tools, 50, rue Delisle, Levis Quebec, G6V 6K2 http://www.m-powertools.com/ May 2011 Woodworkers and Hobbies Supply Center Ltd. 1-10 Mount Tallant Avenue, Terenure, Dublin, 6W,Ireland http://www.m-powertools.com/ April 2011 "The R1 tape measure is designed for right-handed users and features a blade that reads from right to left. This allows a user to hold the tape measure with their left hand while placing marks with their right hand..."READ THE FULL REVIEW http://toolguyd.com/2011/04/m-power-r1-right-handed-tape-measure/ March 2011 Woodpeckers, 11050 Industrial First, North Royalton, Ohio 44133, Tel : 1-800-752-0725, Fax: 440-230-2552 http://www.m-powertools.com/ February 2011 "Spacing markings equidistantly can be tedious and prone to error; it's easy to make mistakes calculating the distance between the marks. The Point-2-Point from M-Power makes spacing marks equidistantly almost as easy as pulling out a tape measure..."READ THE FULL REVIEW http://www.m-powertools.com/products/point-2-point/p2p-toolmonger.htm November 2010 The following will be featured on Cool Tools DIY Network: PSS Sharpening System grand debut is November 25th, 2010, Combination 3D Try Square grand debut is November 26th, 2010, Flat Lying Trammel Set grand debut is December 8th, 2010 http://www.m-powertools.com/ November 2010 "When it comes to powered machinery, I'm a fan of using carbide inserts in the cutterhead instead of traditional straight knives. The cutters last longer, they do a better job on figured woods and they make the machine quieter..." READ THE FULL REVIEW http://www.m-powertools.com/products/mercpro/fi-popularwoodworking.htm November 2010 "SQUARING A LINE AROUND AN EDGE is no easy task. It takes a bright light, good eyes and a steady hand – or a clever device..." READ THE FULL PRESS RELEASE http://www.m-powertools.com/products/c-3d/americanww-review.htm November 2010 "M Power's clever new tool combines a highly accuate traditional square with a saddle square and a small bevel square..." READ THE FULL PRESS RELEASE http://www.scrollsawer.com/reviews/m-power_s-combination-3-d-square.html October 2010 Woodpeckers, 11050 Industrial First, North Royalton, Ohio 44133, Tel : 1-800-752-0725, Fax: 440-230-2552, Email: mailroom@woodpeck.com http://www.woodpeck.com October 2010 "L'équerre, vous connaissez ! Elle sert principalement à tracer des traits perpendiculaires à un chant, et quelquefois à vérifier des équerrages. Rien de plus normal puisqu'elle est faite pour cela" READ THE FULL PRESS RELEASE http://www.m-powertools.com/products/c-3d/bois-review.htm September 2010 "Over 3 years of development and testing has resulted in the Worlds first range of bevel edged chisels with replaceable ready sharpened HSS tips - Keeping you at the job not back at the grind stone." READ THE FULL PRESS RELEASE http://www.m-powertools.com/news/merc-press.htm August 2010 "With the profile scriber, Canadian company M.Power Tools has come up with a clever tool for accurately copying almost any workpiece contours. The new scriber makes parallel scribing much easier and more accurate than the usual makeshift tool often used for this task..." READ THE FULL PRESS REVIEW http://www.m-powertools.com/products/perfect-butt/bmonline.htm July 2010 "M.Power's Combination 3D Square ($50) is a try square, marking gauge, and saddle square all in one. The pencil-holding marking gauge is easily removable, so it can be attached to a longer straightedge to use as a giant compass..." READ THE FULL PRESS REVIEW http://www.m-powertools.com/products/c-3d/ttm-review.htm July 23rd 2010 Big Tool Store, 4640 E. 63rd St South, Derby, KS 67037, Tel: 316 788 6500, Toll Free: 1 800 788 6505, Fax: 316 788 7571, e-Mail: info@bigtoolstore.com http://www.bigtoolstore.com/storefront/shopbybrands.aspx?auth=281 July 16th 2010 Klingspor's Woodworking Shop, 856 21st. St. Dr. S.E., Hickory, NC 28602, Tel: 1-800-228-0000, Fax: 1-800-872-2005 http://www.woodworkingshop.com/cgi-bin/2DC72D03/mac/template.mac/loadHtmlPage?htmlPage=home_page.htm July 16th 2010 "Though statistics vary, it seems on average that 10 percent of the population is left-handed. So here's a little experiment for all you right-handers..." READ THE FULL PRESS REVIEW http://blogs.popularwoodworking.com/editorsblog/Does+Your+Tape+Measure+Up.aspx June 26th 2010 ""Someone once said "why reinvent the wheel", well if M-Power has anything to do with it then their new 3DC combination square is the reinvented wheel and this is a well designed tool. The list of features and functions make this a tool to have..." READ THE FULL PRESS REVIEW http://www.thisoldworkshop.com/c3d-review.htm June 2010 Infinity Cutting Tools, 6089 Johns Rd, Suite #11, Tampa FL, 33634, Tel: 1-877-USA-BITS, email: info@infinitytools.com http://www.infinitytools.com/ May 7 2010 “Originally designed for kitchen layout crews in the UK, the Perfect Butt Profile Scriber takes the guess work out of accurately profile scribing countertops, saving considerable time in the process...” READ THE FULL PRESS REVIEW http://www.contractorsupplymagazine.com/pages/Spre/The-Perfect-Butt-Profile-Scriber-from-MPOWER.php May 6 2010 “M.POWER Tools recently announced their Combination 3D Square (C3D). The C3D (available in stores June 1) is a precision hybrid, a genuine alternative that covers the functions of combination or try-square, saddle square, deep range marking gauge, bevel gauge, and rule...” READ THE FULL ARTICLE http://americanwoodworker.com/blogs/tools/archive/2010/04/15/tool-news-m-power-tools-combination-3d-square.asp Apr 23 2010 “If you have ever done any kind of home renovation or trim work, and you are a bit of a perfectionist, chances are you cringe at the sight of gaps between two surfaces. Whether these present between trim and drywall or between cupboards and out of square walls for example, the fact remains that these gaps are unsightly and can be difficult to fill or hide. The best solution is to prevent the gaps from being created int he first place, and this is where a good profile scribing tool comes into play...” READ THE FULL PRESS REVIEW http://www.onlinetoolreviews.com/reviews/mpowerprofilescriber.htm Apr 17 2010 “The clue’s in the name – It indicates a perfect scribe line in 3D, both width and thickness simultaneously. The C3D is a precision hybrid, a genuine alternative that covers the functions of: combination or try-square, saddle square, deep range marking gauge, bevel gauge and rule — all in one tool...” READ THE FULL PRESS REVIEW http://www.contractorsupplymagazine.com/pages/Spre/Combination3D-Square-from-MPOWER.php Apr 16 2010 “"The 3D Revolution: Is everything being made in 3D today?" Well not the traditional combination square or trisquare. They remain solidly 2D; and what of the new Combination3D Square from M.POWER? The clue’s in the name – It indicates a perfect scribe line in 3D, both width and thickness simultaneously...” READ THE FULL PRESS RELEASE http://www.m-powertools.com/news/combo-press.htm Mar 16 2010 We’d like to welcome a new distributor: Plektra Trading, Ruusankatu 8, 00250 Helsinki, Finland. Tel: +358-10-3878500, Fax: +358-10-3878501, Email:plektratrading@googlemail.com http://www.plektratrading.com/index.php?node_id=11359 Mar 15 2010 We’d like to welcome a new distributor: Select Products, 6851 W Sunrise Blvd. Ste: 140, Plantation, FL 33313. Phone: +1 800 458 6063, Fax: +1 954 797 6598 http://www.selectproducts.com/site/index.php Feb/Mar 2010 “Trammel points are a great tool for marking circles of all sizes but they normally have one flaw. In order to ensure that the circle is a perfect radius you really have to focus on keeping the points perpendicular to the surface that you are marking. The Flat Lying Trammel Set (FLTS) has remedied this problem...” READ THE FULL REVIEW http://www.m-powertools.com/products/tri-scribes/flts-canadian.htm Feb 03 2010 We’d like to welcome a new distributor: The Carpentry Store, Unit D4, M7 Business Park, Newhall, Naas, Kildare. Tel: +353 45 883088, Fax: +353 45 883188, Email: sales@thecarpentrystore.com http://www.thecarpentrystore.com/index.html Jan 07 2010 “A difficult question to pose and depending on who you ask a tricky answer to publish. Fortunately I refer to M.POWER’s “Perfect Butt” Profile Scriber rather than any anatomical preference. Originally designed for kitchen fitters in the UK. The Perfect Butt takes the guess work out of accurately profile scribing worktops into their locale, saving considerable time in the process...” READ THE FULL PRESS RELEASE http://www.m-powertools.com/news/pb-press.htm