Point-2-Point™ layout measuring tool

Expand then contract for your instant visual guideSetting out a row of screws, pins or dowels quickly and without too much hassle isn't easy. Usual process: Measure the length of the run and divide by the number of points plus one. Then divide the extra one point by two and that gives your starting and finishing points. Then measure out each of the remaining points by the total on the calculator. Alternatively extend a Point-2-Point™ fully and bring the mechanism down to the required size. Lock the setting in place with the Point-2-Point's™ pinch bolts and you're ready to start marking out.

Tool Features:
•   Consists of 8 x stainless steel points
•   Extends to a maximum of 2ft (600mm)
•   4 x Brass pinch bolts lock the mechanism in place
•   Multiple uses: woodwork, sewing, general craftwork, even in the kitchen

Lay out Dowels, Pins, Screws and much moreWhen working out the correct number and position of biscuits, dowels, screws, pins or coat hook pegs, or calculating the maximum number of strips that can be cut from a board, Point-2-Point™ really helps as you're able to see the divisions before you start.

Save time and hassle with the Point-2-Point™Instead of messing about with calipers or a calculator and marking things up only to erase and sand them away, simply extend the Point-2-Point™, to give an instant visual guide to locations.

Lock and transfer your measurements Point-2-Point™ has a four-point locking mechanism so you can transfer your locked measurements between boards and over larger areas, and eight stainless steel uprights which expand to a maximum length of 2ft (600mm). With the Point-2-Point™ you instantly get a visual aid to design and mark decorative details, joinery, rip lines, loose tenons, or anything else with a glance and a few strokes of a pencil or marking knife. It's mechanism can be gently "flexed" for marking equidistant points on a circle, ellipse, or French curve and can be used to mark equally-spaced points on a straight line for borders and edges.

Not just for woodworking Point-2-Point™ isn't just for woodworkers, valued customers like you have told us that it's great for sewing and general craft-work, too, enabling you to work out the number and location of pleats on curtains, the location of shirt buttons, and even slicing equal cake portions.

Save yourself time, effort, and hassle with M.POWER's Point-2-Point™.

Buy one now from a supplier near you!