DMT-M.POWER PSS1

hand tools

drill bits

vacuum systems

Regain that Sharpe edge in seconds... Chisel in... and sharpen. Plane blade in... and sharpen. NO set up time.. NO complicated attachments and No experience needed.. It’s that simple. From the total beginner to the most discerning of professionals. The PSS will deliver a flat ground edge every time.
Now with DMT diamond stones as standard.

• No Set Up time
• Safe - Simple - Quick to use
• Unique Lateral Sharpening action ensures a superb edge and a flat ground finish
• The blade remains stationary when sharpening - so it's very safe
• Sharpens square edge chisels and plane irons from 1/8th' (3mm) to 2 1/2' (64mm)
• Change the grade of DMT diamond stone instantly with the magnetic lock in (5 DMT grades available)
• Change the sharpening angle from 25' primary to 30' secondary instantly
• Built to last - Machined in solid aluminum and finished in a hard wearing anodize
• Carriage runs on Nylon 66 slip rails for a smooth action

DMT have developed an exclusive range of 5 different grades of diamond stone for use with the PSS. From the extra course 120 grit stone (left) for fast removal of material to the Super Fine Finishing 1200 grit (right) for that supreme finish. No other hand held system uses such a wide variety of diamond grades for rapid removal of material to fine edge honing.

Getting that ‘Razor Sharp’ finish on your chisels and plane irons has never been so easy!!

If you were to pick up one of your chisels or planes right now, what kind of edge would be on it? Do you find yourself settling for less than the quality of work you’d like to have or engineering around the use of these tools because they just don’t cut the way you want them to? Or have you maybe learned that a dull tool is far more dangerous than a sharp one for both your safety and your project? Can you satisfactorily plane end-grain with any plane you own, or pare it with one of your chisels? If your answers to these questions are less than enthusiastic, we’ve got a real treat for you!

M.POWER Precision Sharpening System (PSS1)! This tough, aluminum jig including 2 x DMT Monocrystalline diamond abrasive stones, will help you gain that edge and keep it there literally razor sharp!

The Precision Sharpening System holds the blade stationary and its angle constant while a diamond stone is guided across the cutting edge (at a 90° angle to the tool’s normal cutting direction) at either 25° or 30°, depending on your application, making the bevel flat and the edge true, lasting, and requiring only minimal maintenance unless chipped or neglected. We’ve included Preparation and Finishing Diamond stones so you can start low to gain that super fine edge that makes a cutting tool a pleasure to use. The instructions we’ve provided will have you putting a razor edge on your chisels and plane irons within a few minutes of opening the package.

Usage is simple! insert the coarsest stone into the carriage of the PSS1, place the tool to be sharpened in the bed and steadied against the fence, and glide the carriage along the dovetailed track back and forth until a bright line appears across the entire width of the cutting edge. Move up to the next grit and repeat, again.

The full PSS instructions are available in full, at the top of this page and can be downloaded or printed for a more detailed understanding, but the process really is very simple!

Don’t endure dull chisels and planes any longer. Order the DMT-M.POWER Precision Sharpening System today and start enjoying those hand tools you’ve been trying to avoid for way too long. Buy On-Line.